Jetting for IAME kart engines - Google Play
You'll be able to see results in few seconds.
Publisher Description
Needles, pop-off & exhaust length by weather for IAME X30, Super 175 & Leopard
Works out the carburation of IAME kart engines with a diaphragm carburettor, from the real temperature, humidity, atmospheric pressure and altitude.
ENGINES
IAME Leopard RL, X30 Senior, X30 Junior and X30 Super 175, with Tryton HB27 and Tillotson HW-27A, HB-10A and HL-334AB carburettors.
RESULT
The four numbers you actually adjust on a diaphragm carburettor: HIGH NEEDLE opening, LOW NEEDLE opening, POP-OFF pressure and EXHAUST LENGTH. The needles come both as a fraction of a turn and as turns and minutes, the two ways they are spoken. Plus air density and density altitude. And two fine tunings, one per needle, to match the recommendation to your engine and how it is prepared.
CONDITIONS
The weather, two ways: from the nearest public station, with its distance and the time of the reading, or typed in by hand. It works just the same with no signal.
ENGINE
Engine type, Junior exhaust restrictor, carburettor, oil mix and track type. The restrictor list includes 22.7 mm, the current X30 Junior specification since the 2021 update and still in the 2024 and 2025 regulations; 22, 26, 29 and 31 mm are kept for engines still on the previous scheme.
LOGBOOK
Saves every session with its conditions and its carburation, and then you write down what you actually fitted and how it went: lean, good or rich, separately for the low needle and the high one. Laps, best lap and max RPM too.
Everything stays on your device. The logbook exports to CSV with the difference between what you fitted and what was recommended, session by session, and can be copied to another phone.
TRACKS
112 karting circuits with their altitude and track length. Picking the track sets the altitude — the circuit's, not the town's — and works out the track type. Works with no signal.
SHARE
A card with the four numbers, the engine and the conditions, to send to your mechanic. A session's card also carries what you fitted and how it went.
UNITS
°C and °F, metres and feet, mb, hPa, mmHg and inHg, BAR and PSI, millimetres and inches.
The values are a guide and a starting point. Every engine, every build and every fuel is different.
About Jetting for IAME kart engines
The company that develops Jetting for IAME kart engines is ISEnet. The latest version released by its developer is 1.0.
To install Jetting for IAME kart engines on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-09-25 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Jetting for IAME kart engines as malware if the download link to com.isenet.jettingforiameleopardx30 is broken.
How to install Jetting for IAME kart engines on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the Jetting for IAME kart engines is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by Jetting for IAME kart engines will be shown. Click on Accept to continue the process.
- Jetting for IAME kart engines will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version
posted on 2026-09-25
2.0 is rebuilt from scratch and now works like the iPhone app.· The 22.7 mm restrictor, the current X30 Junior specification.· Needles written the way they are said: 1/2 and 7/8 turn.· Logbook: what you fitted, how it went, laps and best lap. CSV and backup.· 112 tracks: picking yours sets its altitude and track type.· Nearest weather station, Finnish and dark mode.
version
posted on 2026-09-25
2.0 is rebuilt from scratch and now works like the iPhone app.
· The 22.7 mm restrictor, the current X30 Junior specification.
· Needles written the way they are said: 1/2 and 7/8 turn.
· Logbook: what you fitted, how it went, laps and best lap. CSV and backup.
· 112 tracks: picking yours sets its altitude and track type.
· Nearest weather station, Finnish and dark mode.
version
posted on 2026-09-25
2.0 is rebuilt from scratch and now works like the iPhone app.
· The 22.7 mm restrictor, the current X30 Junior specification.
· Needles written the way they are said: 1/2 and 7/8 turn.
· Logbook: what you fitted, how it went, laps and best lap. CSV and backup.
· 112 tracks: picking yours sets its altitude and track type.
· Nearest weather station, Finnish and dark mode.
version 1.6
posted on 2023-09-03
Improved service for obtaining weather information.
Minor changes in user interface.
Performance optimizations.
version 1.5.2
posted on 2020-11-06
X30 Junior engines are added with different exhaust restrictors
version 1.4.2
posted on 2018-07-17
X30 is added with Tillotson carburetor
version 1.2
posted on 2016-04-13
Improved service for obtaining weather information.,Minor changes in user interface.
Disclaimer
Official Google Play Link
We do not host Jetting for IAME kart engines on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Jetting for IAME kart engines is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
